NETGEAR WPN802 - Manual (Page 48)

Reference Manual for the NETGEAR RangeMax™ Wireless Access Point WPN802
5-6 Management and Information
202-10101-01, May 2005
Note that if the wireless access point is rebooted, the table data is lost until the wireless access
point rediscovers the devices. To force the wireless access point to look for associated devices,
click the Refresh button.
Note: A wireless network can include multiple wireless access points, all using the same network
name (SSID). This enables extending the reach of the wireless network and lets users roam from
one access point to another, providing seamless network connectivity. Under these circumstances,
be aware that only the stations associated with this access point will be presented in the Available
Station List.
Viewing Statistics
Click on the Statistics link to display usage statistics, as shown below.
Figure 5-6: Statistics screen
This page displays both wired and wireless interface network traffic. Click Refresh to update the
current statistics.