Figure 5-2: upgrade firmware dialog box, Backing up settings or restoring settings, Figure 5-3: backup/restore settings dialog box – NETGEAR WPN802 User Manual
Page 45: Backing up settings or restoring settings -3
Reference Manual for the NETGEAR RangeMax™ Wireless Access Point WPN802
Management and Information
5-3
202-10101-01, May 2005
The Upgrade Firmware dialog box opens:
Figure 5-2: Upgrade Firmware dialog box
4. Click the Browse button and browse to the location of the upgrade file
5. Click Upload.
In some cases, you may need to reconfigure the wireless access point after upgrading.
Backing up Settings or Restoring Settings
This page lets you back up the Access Point’s current settings and restore the factory default
settings. Once you have the Access Point working properly, you should back up the information to
have it available if something goes wrong. When you backup the settings, they are saved as a file
on your computer. You can restore the Access Point’s settings from this file.
From the main menu of the browser interface, click the Backup/Restore Settings link under the
Management heading. The Backup/Restore Settings dialog box opens:
Figure 5-3: Backup/Restore Settings dialog box