National Instruments NI 9475 - Manual (Page 13)

© National Instruments Corp. 13 NI 9475 Operating Instructions and Specifications
support for sleep mode. Refer to the software help for information
about enabling sleep mode. Visit
ni.com/info and enter
cseriesdoc for information about C Series documentation.
Typically, when a system is in sleep mode, you cannot
communicate with the modules. In sleep mode, the system
consumes minimal power and may dissipate less heat than it does
in normal mode. Refer to the Specifications section for more
information about power consumption and thermal dissipation.
Specifications
The following specifications are typical for the range –40 to 70 °C
unless otherwise noted. All voltages are relative to COM unless
otherwise noted.
Output Characteristics
Number of channels.......................... 8 digital output channels
Output type ....................................... Sourcing
Power-on output state ....................... Channels off
External power supply
voltage range (V
sup
)........................... 0–60 VDC