Isolation voltages, Safety standards – National Instruments NI 9475 User Manual
Page 17
© National Instruments Corp.
17
NI 9475 Operating Instructions and Specifications
Isolation Voltages
Channel-to-channel........................... No isolation between
channels
Channel-to-earth ground
Continuous ................................. 60 VDC,
Measurement Category I
Withstand.................................... 1,000 V
rms
, verified by a 5 s
dielectric withstand test
Safety Standards
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement,
control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
Note
For UL and other safety certifications, refer to the
product label or visit
ni.com/certification
, search
by module number or product line, and click the
appropriate link in the Certification column.