NetComm N3G002W - Manual (Page 49)

YML894 Rev1 N3G002W 3G Wireless Router User Guide N3G002W 3G Wireless Router User Guide
www.netcomm.com.au 49
Advanced Setting > QoS
To Enable QoS make sure the Enable Tick Box on the top of the page is ticked.
Upstream bandwidth Total bandwidth of outgoing traffic.
Downstream
bandwidth Total bandwidth of incoming traffic.
You can specify 8 QoS rules to control data flows through the Router.
Local IP: IP address of LAN host
Local Port: TCP or UDP port
Remote IP: IP address of WAN host
Remote Port: TCP or UDP port
QoS Priority The QoS Packet Filter classifies data packets to three kinds of data flows (High,Normal,Low). The
ratio of bandwidth division of each data flow is 6:3:1
Enable Make sure you tick the Enable tick box so that the QoS Filter is active.
Click Save to save or Undo to cancel.