NetComm N3G002W - Manual (Page 9)

YML894 Rev1 N3G002W 3G Wireless Router User Guide N3G002W 3G Wireless Router User Guide
www.netcomm.com.au 9
CHAPTER 2 CONNECTING yOUR N3G002W
WIRELESS ROUTER
Connect the N3G002W Wireless Router to Your Network
Note: DO NOT connect N3G002W 3G Wireless Router to power before performing the installation steps below.
Step 1.
Attach the antenna.
1. Remove the antenna from its plastic wrapper.
2. Screw the antenna in a clockwise direction to the back panel of the unit.
3. Once secured, position the antenna upward at its connecting joint. This will ensure optimal reception.
Step 2.
If using a 3G PC Card, remove the dust cover from the WAN PCMCIA Card Slot by inserting a fingernail under
the grooved section of the dust cover and pulling to remove.