Led indicators – NetComm N3G002W User Manual
Page 7
YML894 Rev1
N3G002W 3G Wireless Router User Guide
N3G002W 3G Wireless Router User Guide
www.netcomm.com.au
LED Indicators
Label
Status
Indicates
3G
Flashing
Flashes when unit is ready
Off
Power is off
LAN
Flashing
Flashes when data is being sent and received on the LAN connection
On
Indicates a link to your LAN or Network card is active
Off
Indicates no link to LAN
WAN
Flashing
Flashes when data is being sent and received on the WAN connection
On
Indicates that the upstream link to your Modem or router via the WAN port is active
Off
Indicates no link to WAN
WIFI
Flashing
Indicates that the Wireless link is enabled
Off
Indicates that the Wireless link is disabled
Back Panel Ports
Antenna
To connect to the supplied detachable antenna
WAN
10/100 Base T Ethernet port (RJ-45) uplink port to connect to a modem or router
LAN
10/100 Base T Ethernet port (RJ-45) to connect to Ethernet network card or Ethernet Hub/Switch
Reset
To reset your Wireless Router to factory default settings (All customized settings that you have saved will
be lost!)
Power
Connect to the Power Adapter that comes with your package