NordicTrack 30702.0 - Manual (Page 18)

18
THE USER’S MODE
The console features a user’s mode that keeps track of
the total number of miles that the walking belt has
moved and the total number of hours that the treadmill
has been used. The information mode also allows you
to select miles or kilometers as the unit of measure-
ment and to turn on and off the display demo mode.
When the user’s mode is selected, you can also
choose an audio setting and a volume setting for your
iFit workouts.
To select the information mode, hold down the Stop
button while inserting the key into the console.
The upper left digit(s) in the
display will show the total
number of hours that the
treadmill has been used.
The lower right digit(s) in the
display will show the total
number of miles (or kilome-
ters) that the walking belt has
moved.
An “E” for English miles or an
“M” for metric kilometers will
appear as the top right digit in
the display. Press the 1 Step
Speed increase button to
change the unit of measure-
ment if desired.
When you use an iFIT Card,
a personal trainer will guide
you through your workouts
and give detailed instructions
if “P” is selected as the audio setting. If you turn off the
“P” setting, your personal trainer will simply guide you
through your iFIT workouts. Press the 1 Step Incline
decrease button to change the audio setting.
You can adjust the volume of
the personal trainer audio (0
through 5) by pressing the 1
Step Incline increase button
repeatedly. The volume set-
ting appears as the lower mid-
dle digit in the display.
Note: The console features a
display demo mode, designed
to be used if the treadmill is
displayed in a store. While the
demo mode is turned on, the
console will function normally
when you plug in the power cord, switch the circuit
breaker to the reset position, and insert the key into the
console. However, when you remove the key, the dis-
plays will remain lit, although the buttons will not func-
tion. If the demo mode is turned on, a “d” will appear in
the display while the information mode is selected. To
turn on or off the demo mode, press the 1 Step Speed
decrease button.
To exit the information mode, remove the key from the
console.