5 system reset button, System reset button, Verbose mode – Network Technologies CS-16/8 User Manual
Page 35: User logout, Rear view of serimux-term-cs-16
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
30
¾
Verbose mode
Send or type in:
[
V] [Enter]
The answer will be:
OK
[
CR][LF]
and the Terse mode will be terminated. The “Accessible host list” or the “User main menu” will be displayed.
¾
User Logout
Send or type in:
[
L] [Enter]
The answer will be:
OK
[
CR][LF]
With the next login of the same user, Terse mode will resume.
3.2.5 System Reset button
The “System Reset” button, located on the rear of the RACKMUX (see Figure 25), may be pressed at any time to refresh the
SERIMUX without powering it OFF. This might be necessary in the event the SERIMUX should fail to respond to normal
commands.
Figure 25- Location of Restore Defaults button
System Reset button
RESET
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
NTI
NETWORK
TECHNOLOGIES
INCORPORATED
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com
R
MONITOR
KEYBOARD
TERMINAL-
10 BASE T
ISP
PARALLEL
SERIAL
PRINTER
16
Rear View of SERIMUX-TERM-CS-16