National Instruments NI PXIe-8105 - Manual (Page 37)

Chapter 3 I/O Information
© National Instruments Corporation 3-5 NI PXIe-8105 User Manual
COM1
Figure 3-3 shows the location and pinouts for the COM1 connector on the
NI PXIe-8105. Table 3-3 lists and describes the COM1 connector signal.
AMP manufactures a serial port mating connector, part number 745491-5.
Figure 3-3. COM1 Connector Location and Pinout
Table 3-3. COM1 Connector Signals
Pin Signal Name Signal Description
1 DCD# Data Carrier Detect
2 RXD# Receive Data
3 TXD# Transmit Data
4 DTR# Data Terminal Ready
5 GND Ground
6 DSR# Data Set Ready
7 RTS# Ready to Send
8 CTS# Clear to Send
9 RI# Ring Indicator
5
1 6
9
COM1