Nikon XX152-02-00 - Manual (Page 23)

Figure 8
Camera Mounting Bracket Adjustment – 2.6-6 mm Version Shown
with the
place on
9.
Insert the clip of the safety cord on the lower dome into the hole in the enclosure. Refer to label in the
enclosure. Lift the lower dome up to the SurveyorVFT and align the molded tabs on the lower dome
recesses on the inner enclosure. Press the lower dome into the SurveyorVFT and verify that it snaps into
both sides. The upper edge of the lower dome should be flush with the ceiling plane. Refer to Figure
Figure 9
In-Ceiling Mount Final Installation
XX152-02-00 Rev 1004 SurveyorVFT Fixed Camera Dome Installation • 13