NetComm NP2008 - Manual (Page 11)

Specifications of the switch
Standard IEEE802.3 10Base-T Ethernet IEEE 802.3u &
802.3x 100 Base-TX Fast Ethernet
Network Interface Eight 100BASE-TX / 10BASE-T N-Way ports
Data Transfer Rate Ethernet: 10Mbps (half duplex)
20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex)
200Mbps (full duplex)
Network Cable 10 BASE-T: Cat.3, 4 or 5 UTP Cables (100-ohm
impedance)
100BASE-TX: Cat. 5 UTP Cables (100-ohm imped-
ance)
Topology Star
Buffer Memory 2M Bits
Transmission Method Store and forward
Filter/Forward
14880 pps / 10 BASE-T port
148800 pps / 100 BASE-TX port
MAC Address Table Up to 8K
LED Indicators
Per Device Power
Per Port 100Mbps, LINK/ACT
Flow control Pause frame (Full-duplex)
Back-pressure (Half-duplex)
Duplex mode Supports both half-duplex and full-duplex mode
Power Supply External Power Pack
9volts DC, 1000ma
EMI FCC Class A / CE Mark / C-Tick
Temperature 0 ~ 40 Degree Celcius
Humidity 5% ~ 90%
Dimensions 147mm x 92mm x 22mm (L x W x H)
Housing Metal
Safety TUV, CUL
Warranty 3 Years - 1 year Standard + 2 additional with On-
Line registration