Cascading the switch – NetComm NP2008 User Manual

Page 9

background image

Cascading the switch

When attaching the NP2008 switch to an additional switch, router or
other devices, be sure to verify the port type implemented before con-
necting any cable.

A) Connecting the NP2008 to another NP2008:

Your NP2008 switch supports a switch selectable UP-Link port, port 8
located on the rear of the switch. To connect one switch to another you
will need a Category 5/5e Twisted-pair straight through cable of a suit-
able length. Please see cable details on page 5 & 6 for more details on

“Normal” or “Uplink” modes can be selected through the
uplink selector switch located on the right side of the switch.

Uplink Enabled


Uplink Select Switch

Right side view