National Instruments FP-DO-403 - Manual (Page 13)

© National Instruments Corp. 13 [c]FP-DO-403
contains the environmental regulations and directives with which
NI complies, as well as other environmental information not
included in this document.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers At the end of their life cycle, all products
must be sent to a WEEE recycling center. For more
information about WEEE recycling centers and
National Instruments WEEE initiatives, visit
ni.com/
environment/weee.htm .
Mechanical Dimensions
Figure 6 shows the mechanical dimensions of the FP-DO-403
installed on a terminal base. Dimensions are given in millimeters
[inches]. If you are using the cFP-DO-403, refer to the Compact
FieldPoint controller user manual for the dimensions and cabling
clearance requirements of the Compact FieldPoint system.
Figure 6. FP-DO-403 Mechanical Dimensions
⬉ᄤֵᙃѻક∵ᶧ᥻ࠊㅵ⧚ࡲ⊩ ˄Ё೑
RoHS
˅
Ё೑ᅶ᠋ National Instruments ヺড়Ё೑⬉ᄤֵᙃ
ѻકЁ䰤ࠊՓ⫼ᶤѯ᳝ᆇ⠽䋼ᣛҸ
(RoHS)
DŽ݇Ѣ
National Instruments Ё೑ RoHS ড়㾘ᗻֵᙃˈ䇋ⱏᔩ
ni.com/environment/rohs_china DŽ (For information
about China RoHS compliance, go to
ni.com/
environment/rohs_china
.)
109.5
[4.31]
91.44
[3.60]
107.19
[4.22]