Nortel Networks MOBILE COMMUNICATION CLIENT 3100 - Manual (Page 29)

Configuring your MCC 3100 for Windows Mobile
Nortel Mobile Communication Client 3100 for Windows Mobile User Guide 29
Configuring your MCC 3100 for
Windows Mobile
This section contains the following topics:
• “Initial configuration” on page 29
• “Advanced Configuration settings” on page 32
Initial configuration
The first time you start MCC 3100 for Windows Mobile, you are prompted
to enter your basic log on information and then log on to the system. Once
you are successfully logged on, additional configuration settings are
automatically downloaded from the MCG 3100 and you can begin using
the MCC 3100.
Completing the initial configuration of the MCC 3100
1. Obtain your basic logon settings from your system administrator.
2. Connect your Windows mobile device to the cellular network.
3. On your Windows mobile device, select Start, Programs, Mobile
Console.
The Login information panel appears.
4. Complete the fields using the information listed in Table 6 "Required
parameters" on page 29 .
Table 6: Required parameters
Parameter Description
Logon Name Enter your account user name on the MCG 3100
Logon
Password Enter your account password on MCG 3100.