Nortel Networks MOBILE COMMUNICATION CLIENT 3100 - Manual (Page 41)

Configuring your MCC 3100 for Windows Mobile
Nortel Mobile Communication Client 3100 for Windows Mobile User Guide 41
4. Select Done.
Home Phone Number Enter the contact location when:
• you call a Buddy in Call-me-First mode
• you receive an incoming call and call
screening mode is enabled
Service Number If your organization has a call service
directory number, enter it here. Otherwise,
leave this field blank.
You can place calls directly from your mobile
device to other parties using the Direct
Outbound mode of the outgoing call service
directory number. Without the DN, you are
restricted to using Call-me-First mode,
where the system calls you before it calls the
other party.
Note: To place calls in the Direct
Outbound mode, leave your caller ID
visible on the device.
Other1 Number Enter your first custom number, such as a
temporary business number. You can direct
a call to this contact location when:
• you call a Buddy in Call-me-First mode.
• you receive an incoming call and call
screening mode is enabled
Other2 Number Enter your second custom number, such as
a temporary business number. You can
direct a call to this contact location when:
• you call a Buddy in Call-me-First mode
• you receive an incoming call and call
screening mode is enabled
Table 9: Owner Information pane fields
Field Description