Nortel Networks MOBILE COMMUNICATION CLIENT 3100 - Manual (Page 35)

Configuring your MCC 3100 for Windows Mobile
Nortel Mobile Communication Client 3100 for Windows Mobile User Guide 35
3. Select Done.
Call settings
Use the Call Settings pane to configure your call screening mode,
network roaming mode (if applicable), and default prefixes.
Configuring your call settings
1. Select Menu, Logout.
2. Select Menu, Options, Call settings.
3. Complete the fields using the information in Table 8 "Call Settings
pane fields" on page 37 as a guide.
Device Standby -
Turn device off if
offline for <x>
minutes You can specify the length of time, (from 1 to
120 minutes), that the MCC 3100 must be
offline, either because you are logged out or
the MCG 3100 is unreachable, before the
device enters standby mode.
In standby mode, most functions are turned
off, but the MCC 3100 can still receive calls
and messages.
You can save power when you are outside of
cellular range (offline), for example, when you
are in a remote geographic area or in an
elevator.
Table 7: Advanced pane fields
Field Description