Nortel Networks MOBILE COMMUNICATION CLIENT 3100 - Manual (Page 31)

Configuring your MCC 3100 for Windows Mobile
Nortel Mobile Communication Client 3100 for Windows Mobile User Guide 31
5. Click Done.
The MCC 3100 logs on to the system.
— If logon is successful, the remainder of your configuration settings
are automatically downloaded and you can begin using the
MCC 3100. The next time you log on, you will go directly to the
Main screen.
— If logon is unsuccessful, the Login information panel remains in
focus, so that you can re-enter your settings.
Note 1: If you are using a GSM device, your service provider may
require you to program an Access Point Name (APN), username and
password under Connections.
Note 2: Before updating the Login Information panel, you must first
log out of the system. For more information about logging off, see
“Logging on and logging off” on page 48 .
Note 3: Nortel recommends that the Outgoing Call Service DN
includes the international access code (+) and your country code as
part of the number to facilitate roaming, add for example
+1 613 123 1111. For the recommended phone number format, see
Figure 1 "Recommended telephone number format" on page 32 .
Mobile Phone
Number Enter your mobile phone number or accept the
autopopulated value.
Recommended number format:
+XX YYY ZZZ ZZZZ
Where:
+ = International access code
XX = County code
YYY = Area code
ZZZ ZZZZ = Local number
Include the international access code (+) and
country code (1) only if required by your system
administrator.
Table 6: Required parameters
Parameter Description