Netopia 4541 - Manual (Page 13)

Making the Physical Connections 2-3
3. Connect the Ethernet cable to the Ethernet por t on the router and the other end to your computer.
You should now have: the power adapter plugged in; the Ethernet cable connected between the router and
your computer; and the DSL cable connected between the router and the DSL wall outlet.
Netopia 4541/4542 ADSL Router status lights
The figure below represents the Netopia 4541/4542 status light (LED) panel.
Netopia 4541/4542 LED front panel
The following table summarizes the meaning of the various LED states and colors:
When this happens... the LEDs...
The power is on Power is green.
The Router detects an error Error is red.
The Ethernet link is established Ethernet is green.
The WAN has trained DSL is green.
The WAN is training DSL flashes green.
Note: The remaining LEDs are not used.
DSL
Power
Error
Ethernet