Netopia 4541 - Manual (Page 130)

10-16 User’s Reference Guide
and transparently.
ATMP/PPTP Default Profile
The WAN Configuration menu offers a ATMP/PPTP Default Profile option. Use this selection when your router is
acting as the ser ver for VPN connections, that is, when you are on the answering end of the tunnel
establishment. The ATMP/PPTP Default Profile determines the way the attempted tunnel connection is
answered.
To set the parameters under which the router will answer attempted VPN connections, select ATMP/PPTP
Default Profile and press Return. The ATMP/PPTP Default Profile screen appears.
■ Toggle Answer ATMP/PPTP Connections to Yes if you want the router to accept VPN connections or No
(the default) if you do not.
■ For PPTP tunnel connections only, you must define what type of authentication these connections will use.
Select Receive Authentication and press Return. A pop-up menu offers the following options: PAP (the
default), CHAP, or MS-CHAP.
■ If you chose PAP or CHAP authentication, from the Data Compression pop-up menu select either None (the
default) or Standard LZS.
WAN Configuration
WAN (Wide Area Network) Setup...
Display/Change Connection Profile...
Add Connection Profile...
Delete Connection Profile...
WAN Default Profile...
ATMP/PPTP Default Profile...
Scheduled Connections...
Configuration Changes Reset WAN Connection: Yes
ATMP/PPTP Default Profile
Answer ATMP/PPTP Connections: No
PPTP Configuration Options
Receive Authentication... PAP
Data Compression... None