Netopia 4541 - Manual (Page 182)

12-10 User’s Reference Guide
The SNMP Setup screen
From the Main Menu, select SNMP in the System Configuration screen and press Return. The SNMP Setup
screen appears.
Follow these steps to configure the first three items in the screen:
1. Select System Name and enter a descriptive name for the Netopia 4541/4542’s SNMP agent.
2. Select System Location and enter the router’s physical location (room, floor, building, etc.).
3. Select System Contact and enter the name of the person responsible for maintaining the router.
System Name, System Location, and System Contact set the values returned by the Netopia 4541/4542
SNMP agent for the SysName, SysLocation, and SysContact objects, respectively, in the MIB II system group.
Although optional, the information you enter in these items can help a system administrator manage the
network more efficiently.
Community strings
The Read-Only Community String and the Read/Write Community String are like passwords that must be used
by an SNMP manager quer ying or configuring the Netopia 4541/4542. An SNMP manager using the Read-Only
Community String can examine statistics and configuration information from the router, but cannot modify the
router’s configuration. An SNMP manager using the Read/Write Community String can both examine and
modify configuration parameters.
System Main
Menu Configuration
SNMP
SNMP Setup
System Name:
System Location:
System Contact:
Read-Only Community String: public
Read/Write Community String: private
Authentication Traps Enable: Off
IP Trap Receivers...
Configure optional SNMP parameters from here.