Netopia 4541 - Manual (Page 175)

Monitoring Tools 12-3
Current status
The current status section is a table showing the current status of the DSL connection. For example:
Profile Name: Lists the name of the connection profile being used, if any.
Rate: Shows the line rate for this connection.
%Use: Indicates the average percent utilization of the maximum capacity of the channels in use for the
connection.
Remote Address: Shows the IP address of the connected remote router.
Est: Indicates whether the connection was locally (“Lcl”) or remotely (“Rmt”) established.
More Info: Indicates the NAT address in use for this connection.
Status lights
This section shows the current real-time status of the Netopia 4541/4542’s status lights (LEDs). It is useful for
remotely monitoring the router’s status. The Quick View screen’s arrangement of LEDs corresponds to the
physical arrangement of LEDs on the router.
Each LED representation can repor t one of four states:
–: The LED is off.
R: The LED is red.
G: The LED is green.
Y: The LED is yellow.
The section “Netopia 4541/4542 ADSL Router status lights” on page 2-3 describes the meanings of the colors
for each LED.
Current DSL Status
Profile Name----------Rate--%Use-Remote Address-----Est.-More Info------------
ISP 1536 10 IP 92.163.4.1 Lcl NAT 192.163.100.6
LED Status
-PWR----ERROR----ETHERNET----DSL- - - - - - - - - - - - +--------LEDS---------
| '-'= Off 'G'= Green
G - - - | 'R'= Red 'Y'= Yellow