Nikon Image Converter - Manual (Page 14)

14
Steps Instructions Explanatory Notes
1 Make sure the camera is turned off.
2 Remove the relay lens from the Mini35:
a. Locate the lock ring (c).
b. Rotate the lock ring (c) counter clockwise.
The relay is attached to the rear of the Mini35
via a bayonet type mount.
The lock ring (c) is the ring located in the front
of the relay lens, nearest to the body of the
Mini35 (photo page 11).
3 Attach the relay lens onto the camera:
The relay lens attaches like any other XL
mounted lens.Æ
a. Line up the red dots
b. Engage the lens in the mount
c. Rotate the lens until the lock clicks in
place.
C
a
n
o
n