Nikon Image Converter - Manual (Page 26)

26
Follow the steps below to test the image once the Mini35 is attached to the camera:
Steps Instructions Explanatory Notes
1 Install a 35mm film lens in the mount.
2 Turn on the camera in the fully manual
position:
a. Turn off the AutoFocus and Zoom function
b. Focus camera lens on the ground glass
inside the converter
If the image is too dark:
c. Open the iris on the film lens.
d. Open the iris on the camera lens.
3 Focus the 35mm film lens on an object. The image should be sharp in the viewfinder
and on the field monitor.
S
O
N
Y