Nikon Image Converter - Manual (Page 16)

16
5 Mount the relay lens (now attached to the
camera) onto the Mini35Digital image
converter:
Engage the relay into the back port of the
Mini35 and secure it in place with the lock ring
(c).Æ
a. Open the lock ring (c).
b. Line up the relay lens into the port holding
the camera by its top handle. Make sure
the locating pin is fully engaged.
c. Close the lock ring (c) clockwise to secure
the relay lens.
Note: Be sure the camera does not
accidently disengage.
C
a
n
o
n