Nikon Image Converter - Manual (Page 24)

24
5 Mount the relay lens (now attached to the
camera) onto the Mini35Digital image
converter:
Before the 1 st attachment, the bayonet mount
of the relay lens has to be adjusted:
Engage the relay into the back port of the
Mini35 and secure it in place with the lock ring
(b).
a. Open the lock ring (b)
b. Slightly release the 4 screws (s) in front of
the relay lens. The bayonet ring (r) must be
moveable.
c. Line up the relay lens into the port holding
the camera by its top handle. Make sure
the locating pin is fully engaged. Close lock
ring.
d. Bring the camera carefully into a standard
vertical position. Then remove camera
without losing this position.
e. Lock the 4 screws in the relay front and re-
connect relay lens to the adapter port
f. Close the lock ring (b) clockwise to secure
the relay lens.
Note: Be sure the camera cannot disengage
accidentally.
S
O
N
Y