Nikon Image Converter User Manual

Page 23

Advertising
background image

23

4

Prepare the Mini35:

a. Release the two screws (h) on the bottom

of the camera support, and slide the
support toward the rear battery holder.

b. Release the knob (e), push the pad (d)

down and lock it in that position by
tightening knob (e).

The first time a camera has to be installed you

will find it easier to start by sliding the camera
support out of the way.

The camera support platform has a spring-

loaded pad in the center that adjusts for the
height of the camera. The knob with a lever
(e), at the back of the camera platform, locks
the spring-loaded pad in place. By releasing
that knob the spring will push the pad to its
highest position making the mounting of the
camera difficult

S
O
N
Y

Advertising