NetComm 3G Wireless Router User N3G005W User Manual
Page 56
N3G005W 3G Wireless Router User Guide
YML894 Rev3
5
www.netcomm.com.au
Advanced.Setting.>.System.Time
This page allows you to change the System time setting on the N3G005W Wireless Router.
There are three ways to set up the System Time on the unit.
1.
Get Date and Time by NTP Protocol. Select if you want to get the date and time from an NTP server. You
also need to choose the Time Server and the Time Zone. Click on Sync Now! to sync the time with the
Time Server.
2.
Set Date and Time using PC’s Date and Time. Select if you want to set the unit time using your computer
date and time.
3.
Set Date and Time manually. Select to set the date and time manually.
After that, you also need to set the Daylight Saving setting. Select either Enable or Disable and define the Start and
End date for the daylight saving period.
Click Save to save the settings and Undo to cancel.