NEC V850/SF1 - Manual (Page 19)

CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS
User’s Manual U15447EJ1V0UM
19
(1) TEST pins (CP1, CP2, CP13, CP15)
These are pins used for testing the analog signals of the standalone emulator.
• CP1: GND
• CP2: GND
• CP13: GND
• CP15: GND
(2) JP1
This is a pin board for supplying the main system clock.
(3) JP2
This is the switch jumper for the main system clock supply source. Use and retain the factory settings (pins 1
and 2 shorted).
(4) JP3
This is a pin board for supplying the subsystem clock (for details, refer to 2.2 Clock Settings).
(5) Connector for IE-703002-MC connection
This is a connector for connecting with the IE-703002-MC.
(6) Connector for target connection
This is a connector for connecting with the target system or the extension probe.