NEC V850/SF1 - Manual (Page 22)

CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS
User’s Manual U15447EJ1V0UM
22
2.3 Illegal Access Detection ROM Setting
If using the IE-703002-MC for an in-circuit emulator for the V850/SF1 by connecting the IE-703079-MC-EM1, set
JP1 of the IE-703002-MC as follows.
Table 2-3. JP1 Setting in IE-703002-MC
JP1 Description
Open Note Illegal access detection ROM (mounted on IE-703079-MC-EM1) for V850/SF1 is
used.
Note When JP1 is set open, keep the removed jumper contact attached to one pin
as shown in the drawing on the right.
JP1
Jumper
contact
2.4 CPU Operation Voltage Range Switching Setting
If using the IE-703002-MC for an in-circuit emulator for the V850/SF1 by connecting the IE-703079-MC-EM1, set
JP3 and JP4 of the IE-703002-MC as follows.
Table 2-4. JP3 and JP4 Setting in IE-703002-MC
JP3, JP4 Description
JP3
(Short)
1
2
The operation voltage range of the IE-703002-MC is 3.0 to 5.5 V.
JP4
1
2
3
(Open)
The power supply for PORTV DD is generated on the IE-703079-MC-EM1.