How to use remote keyless entry system -10 – NISSAN vehicle User Manual

Page 144

Advertising
background image

CAUTION

Listed below are conditions or occur-

rences which will damage the keyfob:
Do not allow the keyfob to become wet.
Do not drop the keyfob.
Do not strike the keyfob sharply against

another object.

Do not place the keyfob for an extended

period in an area where temperatures

exceed 140°F (60°C).

If a keyfob is lost or stolen, NISSAN rec-

ommends erasing the ID code of that key-

fob. This will prevent the keyfob from un-

authorized use to unlock the vehicle. For

information regarding the erasing proce-

dure, please contact a NISSAN dealer.

HOW TO USE REMOTE KEYLESS

ENTRY SYSTEM
Locking doors

1. Close all windows.
2. Remove the key from the ignition switch.
3. Close the hood and all doors.
4. Push the

button on the keyfob. All

the doors lock. The hazard warning lights

flash twice and the horn beeps once to

indicate all doors are locked.

● When the

button is pushed with all

doors locked, the hazard warning lights flash

twice and the horn beeps once as a re-

minder that the doors are already locked.

● If a door is open and you push the

button, the doors will lock but the horn will

not beep and the hazard warning lights will

not flash.

The horn may or may not beep. For vehicles with

monochrome screen, refer to “Silencing the horn

beep feature” later in this section. For vehicles

with color screen, refer to “Vehicle electronic

systems” in the “Display screen, heater, air con-

ditioner, audio and phone systems” section later

in this manual.

NOTE:
If you use the keyfob to change the horn

beep and lamp flash feature for vehicles

with color screen, the display will not show

the current mode and cannot be used to

change the mode. Use the keyfob to return

to the previous mode and re-enable the

display screen control. Refer to “Vehicle

electronic systems” in the “Display screen,

heater, air conditioner, audio and phone

systems” section for additional informa-

tion.

LPD0209

3-10

Pre-driving checks and adjustments

REVIEW COPY—

2007 Quest (van)

Owners Manual—USA_English (nna)
02/27/06—debbie

Advertising