NISSAN vehicle User Manual

Page 261

Advertising
background image

The recommended operating procedures for this

transmission are shown on the following pages.

Follow these procedures for maximum vehicle

performance and driving enjoyment.

Starting the vehicle

1. After starting the engine, fully depress the

foot brake pedal before attempting to move

the shift selector lever out of the P (Park)

position.

2. Keep the foot brake pedal depressed and

move the shift selector lever into a driving

gear.

3. Release the foot brake, then gradually start

the vehicle in motion.

The automatic transmission is designed so

the foot brake pedal MUST be depressed

before shifting from P (Park) to any drive

position while the ignition switch is in the

ON position.
The shift selector lever cannot be moved

out of P (Park) and into any of the other

gear positions if the ignition key is turned

to the LOCK, OFF or ACC position or if the

key is removed.

To move the selector lever:

Push the button while depressing the brake
pedal
Push the button to shift
Shift without pushing button

Shifting

After starting the engine, fully depress the brake

pedal and move the shift selector lever out of the

P (Park) position.

WARNING

Apply the parking brake if the selector

lever is in any position while the engine is

not running. Failure to do so could cause

the vehicle to move unexpectedly or roll

away and result in serious personal injury

or property damage.

If the key is turned to the OFF or ACC position for

any reason while the vehicle is in N (Neutral), or

any D (Drive) position, the shift selector lever

cannot be moved to P (Park). Additionally, the key

cannot be turned to the LOCK position and be

removed from the ignition switch. If this occurs,

perform the following steps:

1. Apply the parking brake when the vehicle is

stopped.

2. Turn the key to the ON position.
3. Depress the foot brake pedal.
4. Move the shift selector lever to P (Park) or N

(Neutral) to restart the vehicle (P is pre-

ferred). Move the shift selector lever to P

(Park) to park the vehicle and turn the igni-

tion key to the LOCK position to remove the

key.

WSD0161

Starting and driving

5-11

REVIEW COPY—

2007 Quest (van)

Owners Manual—USA_English (nna)
02/27/06—debbie

Advertising