Air conditioner operation -34 – NISSAN vehicle User Manual

Page 198

Advertising
background image

Heating and defogging

This mode heats the interior and defogs the wind-

shield.

1. Press the

air flow control button.

2. Turn the fan control dial to the desired posi-

tion.

3. Turn the temperature control dial to the de-

sired position between the middle and the

hot position.

● When the

position is selected, the air

conditioner automatically turns on (however,

A/C will not appear on the display) if the

outside temperature is more than 36°F

(2°C). The air conditioning system will con-

tinue to operate until the fan control dial is

turned to OFF or the vehicle is shut off, even

if an air flow control button other than

is selected. This dehumidifies the air which

helps defog the windshield. The

mode automatically turns off, allowing out-

side air to be drawn into the passenger

compartment to further improve the defog-

ging performance.

Operating tips

Clear snow and ice from the wiper blades

and air inlet in front of the windshield. This

improves heater operation.

AIR CONDITIONER OPERATION

Start the engine, turn the fan control dial to the

desired position, and push in the

button to

activate the air conditioner. When the air condi-

tioner is on, cooling and dehumidifying functions

are added to the heater operation.
The air conditioner cooling function oper-
ates only when the engine is running.

Cooling

This mode is used to cool and dehumidify the air.

1. Push the

button to the OFF position.

2. Press the

air flow control button.

3. Turn the fan control dial to the desired posi-

tion.

4. Push the

button. A/C will appear on

the display.

5. Turn the temperature control dial to the de-

sired position.

● For quick cooling when the outside tem-

perature is high, push the

button to

the ON position (

shown on display).

Be sure to return the

to the OFF po-

sition for normal cooling (

shown on

display).

Dehumidified heating

This mode is used to heat and dehumidify the air.

1. Push the

button to the OFF position

(

shown on display).

2. Press the

air flow control button.

3. Turn the fan control dial to the desired posi-

tion.

4. Push the

button. The display shows

A/C.

5. Turn the temperature control dial to the de-

sired position.

Operating tips

● Keep the windows closed while the air con-

ditioner is in operation.

● After parking in the sun, drive for 2 or 3

minutes with the windows open to vent hot

air from the passenger compartment. Then,

close the windows. This allows the air con-

ditioner to cool the interior more quickly.

The air conditioning system should be

operated for approximately 10 minutes

at least once a month. This helps pre-

vent damage to the system due to lack

of lubrication.

4-34

Display screen, heater, air conditioner, audio and phone systems

REVIEW COPY—

2007 Quest (van)

Owners Manual—USA_English (nna)
02/27/06—debbie

Advertising