Cruise control -15, Precautions on cruise control -15, Cruise control operations -15 – NISSAN vehicle User Manual

Page 265

Advertising
background image

1.

ACCEL/RES switch

2.

COAST/SET switch

3.

CANCEL switch

4.

ON·OFF switch

PRECAUTIONS ON CRUISE

CONTROL

● If the cruise control system malfunctions, it

cancels automatically. The SET indicator

light in the instrument panel then blinks to

warn the driver.

● If the SET indicator light blinks, turn the

cruise control switch off and have the sys-

tem checked by a NISSAN dealer.

● The SET indicator light may blink when the

cruise control switch is turned ON while

pushing the ACCEL/RES, COAST/SET, or

CANCEL switch. To properly set the cruise

control system, use the following proce-

dures.

WARNING

Do not use the cruise control when driving

under the following conditions:
When it is not possible to keep the

vehicle at a set speed.

In heavy traffic or in traffic that varies in

speed.

On winding or hilly roads.
On slippery roads (rain, snow, ice, etc.).
In very windy areas.
Doing so could cause a loss of vehicle

control and result in an accident.

CRUISE CONTROL OPERATIONS

The cruise control allows driving at a speed be-

tween 25 - 89 MPH (40 - 144 km/h) without

keeping your foot on the accelerator pedal.
To turn on the cruise control, push the main

switch. The CRUISE indicator light in the instru-

ment panel comes on.

To set cruising speed, accelerate the vehicle to

the desired speed, push the COAST/SET switch

and release it. The SET indicator light in the

instrument panel comes on. Take your foot off the

accelerator pedal. Your vehicle maintains the set

speed.

To pass another vehicle, depress the ac-

celerator pedal. When you release the

pedal, the vehicle returns to the previously

set speed.

● The vehicle may not maintain the set speed

when going up or down steep hills. If this

happens, drive without the cruise control.

To cancel the preset speed, use one of the

following three methods.

● Push the CANCEL button; the SET indicator

light in the instrument panel goes out.

● Tap the brake pedal; the SET indicator light

goes out.

● Turn the main switch off. Both the CRUISE

indicator light and SET indicator light in the

instrument panel go out.

The cruise control is automatically canceled and

the SET light in the instrument panel goes out if:

● you depress the brake pedal while pushing

the ACCEL/RES or SET/COAST switch.

The preset speed is deleted from memory.

LSD0159

CRUISE CONTROL

Starting and driving

5-15

REVIEW COPY—

2007 Quest (van)

Owners Manual—USA_English (nna)
02/27/06—debbie

Advertising