How to use the setting button -5 – NISSAN vehicle User Manual

Page 169

Advertising
background image

In case of low tire pressure, a message “LOW

PRESSURE” or “CHECK ALL TIRES” is dis-

played on the screen:
LOW PRESSURE — CHECK ALL TIRES.

WARNING

When a spare tire is mounted or a wheel

is replaced, tire pressure will not be

indicated, the Tire Pressure Monitoring

System (TPMS) will not function and

the low tire pressure warning light will

flash. Contact your NISSAN dealer as

soon as possible for tire replacement

and/or system resetting.

Replacing tires with those not originally

specified by NISSAN could affect the

proper operation of the TPMS.

HOW TO USE THE SETTING

BUTTON

Pressing the SETTING button will change the

settings menu as follows:
Backlight

→ Day Mode Brightness → Night

Mode Brightness

→ Clock Adjust HOURS →

Clock Adjust MINUTES

→ Units → Lang → MP3

Disp Type (if so equipped)

→ Audio or OFF →

Backlight

Backlight

To turn off the screen, select “OFF” of the Back-

light mode by pressing the TUNE button.
The message “Press SETTINGS to resume” will

display for approximately 5 seconds then the

screen will turn off.
To turn on the screen, press the SETTING button

and select “ON” by pressing the TUNE button.
When any button besides SETTING is pressed

with the screen off, the screen turns on for further

operation. The screen will turn off automatically

after the operation is finished.

Day mode brightness

The brightness of the screen during the day can

be changed by pressing the TUNE button.
For additional information, see “

button”

later in this section.

Night mode brightness

The brightness of the screen during the night can

be changed by pressing the TUNE button.
For additional information, see “

button”

later in this section.

Clock operation

The digital clock displays time when the ignition

key is in ACC or ON.
If the power supply is disconnected, the
clock will not indicate the correct time.
Readjust the time.

Clock adjust hours

Press the SETTING button until Clock Adjust

HOURS is shown in the display. Press the TUNE

button up or down to adjust the hour.
Clock adjust minutes

Press the SETTING button again Clock Adjust

Minutes is shown in the display. Press the TUNE

button up or down to adjust the minutes.
To exit the clock adjustment, press the SETTING

button repeatedly. The screen will return to the

audio display if the audio is on. If the audio is not

on, the screen will return to a blank display.

Units

To change the units press the TUNE button to

select “ENGLISH” or “METRIC”.
Unit: US — MI, °F, MPG

Metric — km, °C, L/100 km

Display screen, heater, air conditioner, audio and phone systems

4-5

REVIEW COPY—

2007 Quest (van)

Owners Manual—USA_English (nna)
02/27/06—debbie

Advertising