Connecting the mitel 5330 ip phone – NetComm 5330 User Manual
Mitel 5330 IP Phone
Quick Reference User Guide
3. Connecting the Mitel 5330 IP Phone.
The IP Phone is supplied with a transformer and two Ethernet cables. Connect an
Ethernet cable to the LAN/PWR connector on the back of the IP Phone and connect
the other end of the cable to the PHONE connector on the Transformer.
Connect the other Ethernet cable to the LAN connector on the Transformer and
connect the other end of the cable to an Ethernet port on the Broadband Module (IP
Phone connected locally to the Mitel 3000) or broadband router (IP Phone installed
at a remote location).
Connect the transformer to a power source.
A PC can be connected to the broadband router via the PC port on the back of the IP
Phone if required.
The Mitel 5330 IP Phone can also be powered via
a power over Ethernet LAN switch.
IP Phone Mitel 5330 Quick Refere10 10