NetComm 5330 User Manual

Page 16

background image

Mitel 5330 IP Phone
Quick Reference User Guide


5B. Programming the Mitel 5330 IP Phone for a LAN address.

Programming involves entering the LAN IP Address this information is provided by
your system administrator. Disconnect the power from the phone by removing the
Ethernet cable from the PHONE connector on the Transformer. Hold down keypad
<= & => arrows on the Mitel 5330 IP Phone and reconnect the Ethernet cable to the
Transformer. Release keypad digits <= & => when the display on the IP Phone shows

. Follow the same steps as programming for the WAN
until you reach step 6.

2. Enter the IPLAN address of the Broadband Module
in the ICP IP Address.

IP Phone Mitel 5330 Quick Refere16 16

04/07/2008 15:04:23