Neuton EM 5.1 - Manual (Page 16)

12 NEUTON EM 5.1 Cordless Electric Mower Safety & Operating Instructions
Assembling Your NEUTON Mower
To allow you to quickly begin using your NEUTON Mower, it is shipped to you partially assembled.
The assembly process is easy and does not require any special tools, knowledge, or strength.
Assembling your NEUTON Mower takes just a few steps:
Step 1: Read these “Safety and Operating Instructions” before proceeding.
Step 2: Remove the battery.
Step 3: Charge the battery before your first use.
Step 4: Attach the lower handlebar sections.
Step 5: Attach the upper handlebar assembly.
Step 6: Attach the cable to the handlebar assembly.
Step 7: Attach the rear discharge plate.
Step 8: Insert the battery after it has been fully charged.
Each of these steps is described in detail below. (See Figure 14 on page 18 for a photograph of the
fully assembled Mower.)
Step 1: Read the Safety and Operating Instructions
Before Proceeding
The NEUTON Mower is a motorized cutting machine that uses a sharp blade. For your safety, and
for the best results, it is important to read the information in “Chapter 2: Important Safety
Considerations” before you assemble or use the Mower.
To familiarize yourself with the assembly, features, and operation of your Mower, please read the
remainder of this manual before proceeding.
Important: Keep the box and packing material until you are sure you don’t
want to return your mower.
WARNING! The safety key with its built-in circuit breaker as well as the battery,
should never be inserted during assembly, adjustments, cleaning, blade
replacement, or when the Mower is not in use. Removing the safety key will
prevent accidental starting, and help avoid serious personal injury.