Neuton EM 5.1 - Manual (Page 35)

NEUTON EM 5.1 Cordless Electric Mower Safety & Operating Instructions 31
Installing the Mulching Kit
To mulch your grass, install both the mulching plug
and blade.
1. If necessary, remove the Rear Bagger or side
discharge chute from the Mower.
2. Install the mulching plug (Figure 27). Be sure to
push the plug all the way in until the notch in its
bottom is engaged.
There’s a slight knack to installing the plug: push with
a slightly arcing motion. Align the plug in the Mower,
start to push the top of the plug first then put
pressure towards the bottom and slide in the plug.
3. Remove the cutting blade and install the
mulching blade. For detailed instructions and
safety precautions, please refer to “Chapter 7:
Removing and Attaching the Blade.”
Please refer to Figure 28 for a comparison of
the two blades. Notice that the cutting blade
has a longer stabilizer in the blade’s center, and
one edge of both ends is turned up. The
mulching blade, on the other hand, has a much
smaller stabilizer and does not have any edges
turned up.
Figure 27. Installing the mulching plug
Figure 28. Cutting blade (top) and the
mulching blade (bottom) compared