Indicator light, Cutting height lever, Mower/auxiliary switch – Neuton EM 5.1 User Manual

Page 24

Advertising
background image

20

NEUTON EM 5.1 Cordless Electric Mower Safety & Operating Instructions

Indicator Light

The status indicator light on the lower crossbar
(Figure 15) lights up when a charged battery is
installed and the safety key inserted. The light is
green.

Note:

A green indicator light does not guarantee

that the battery is fully charged, only that it has
some charge, the safety key has been inserted, that
the electrical system is ready, and that the Mower
can be started.

Note:

Although you may notice that a short period of rest may restore the indicator light, you must

still fully charge the battery before continuing to mow. For best results, be sure to always fully
charge the battery after every use.

Cutting Height Lever

The cutting height lever (Figure 16) allows you to easily
adjust how high or low you cut the grass. Notice that
there are six different height positions etched into the
Mower’s body.
To easily move the cutting height lever, hold the
handlebars with your right hand to keep the Mower
steady and adjust the lever with your left hand.
To easily adjust this lever, pull the lever out before
lifting or lowering it. Once you pull it out, it very easily
adjusts to a different level.

Mower/Auxiliary Switch

The Mower/Auxiliary switch (Figure 17) controls the
optional Mower attachments. This switch has two
settings:

Mower, used for normal mowing.

Auxiliary, used when operating an attachment.For
more information about options available for your
NEUTON Mower, see “Chapter 6: Optional
Attachments.”

WARNING! If the green indicator light goes out, do not operate the Mower
again until the battery is fully charged; otherwise the battery’s charging capacity
might be decreased.

Figure 15. Green indicator light

Indicator light

Figure 16. Cutting height lever

Figure 17. Pushing the Mower/Auxiliary
switch to the Auxiliary setting

Advertising