Lifebreath Clean Air Furnace CAF-02-MB - Manual (Page 25)

25
A dedicated maintenance program will prolong the life of
the equipment, and maintain its optimum performance.
We recommend at least two (2) full inspections and clean-
ings per year under normal operating conditions, and more
if circumstances warrant it (i.e. situations of heavy smoke
may require servicing every one to two months).
Service should include:
• Cleaning of screens protecting outside hoods.
• Cleaning of the HRV (aluminum) core.
• Inspect filters and replace as necessary.
• Wipe down drain pans and inside of cabinet, using a mild
disinfectant.
• Ensure condensate drain has free flow of moisture.
• Inspect operation of blowers and electrical panel.
• Confirm operation.
Clean Core Twice a Year
a) Open access door.
b) Carefully grip ends of core, and pull evenly outward.
Core may be snug, but will slide out of the "H" channel.
c) Once removed from the cabinet, remove the foam filters.
d) Wash the core in warm soapy water (do not use dish-
washer).
e) Install the clean filters
f) Install the clean core.
Service/Maintenance
Ultra-efficient
heating coil
Tempered fresh air
to heating coil
Fresh air intakes to HRV
Heated fresh air
to registers
Stale air to outside
Hot water
circulation pump
Hot water to coil
Domestic
water heater
Hot water
return
Heat recovery
ventilator heat
exchanger
PSC type
hi-efficiency
motor Return air
from house