Nortel Networks 6140 - Manual (Page 106)

106
Battery packs
Removing and inserting the battery pack
To remove a battery pack
1. Press down on the latch on the battery
pack at the back of the handset.
2. Pull the battery pack towards you.
The battery pack releases outward.
To insert a battery pack
1. Slide the lip of the battery pack into the
handset cavity.
2. Push the top of the battery pack until it
snaps into place.
Do not force the battery pack into the
handset.
Charging your handset
To charge a battery pack You must charge the battery pack before its
first use.
1. Press End to terminate any calls.
The handset can be off or in standby
state during charging.
2. Place the handset, face forward, into the
Desktop Charger.
An animated charge icon indicates that
charging is in progress.
3. Charge the battery pack.
If the handset is in standby mode, it
displays its extension number and
Charging . It is fully operational and can
receive calls. If the handset is off, only
Charging is displayed and the handset
cannot receive calls.