Nortel Networks 6140 - Manual (Page 115)

115
Quad Charger
the battery pack is inserted, remove the
battery pack and reinsert it into the
charger.
If a flashing LED indicates a battery
pack failure, check the battery pack in a
different bay or substitute another
charger and repeat the operation that
caused the failure. If the same battery
pack lights a steady LED when inserted
in a different bay or charger, the first
charger can be faulty. Contact your
system administrator for service
information.
2. When charging is complete, the LED
turns off. Remove the battery pack from
the charger.
Cleaning the Quad Charger
Clean the Quad Charger by wiping the surface with a plain-water-dampened cloth or
paper towel. A mild detergent solution can be used. Be sure to wipe away any
detergent residue with a plain-water-dampened cloth.
You can clean the battery pack contacts on the handset with isopropyl (rubbing)
alcohol applied with a cotton swab, cloth, or paper towel. Do not push or pull the
CAUTION
Do not immerse the charger in water or any other liquid.
Do not pour liquids into the charger slot.