Nortel Networks 6140 - Manual (Page 63)

63
Handset display
This number is used to identify the handset. It is displayed when the handset is in the
standby state.
The Extension option is for display purposes. You cannot edit this option.
To view the Extension
1. While the handset is in standby state,
press the
Cfg soft key.
2. Use the Nav keys to scroll through the
menu and highlight Extension .
3. Press Enter to select the option.
4. Do one of the following:
• Press Exit to return to the previous
menu and choose another option.
• Press the End button to exit all
menus and return to the standby
state.
Setting up Push-to-talk
Note: The Push-to-talk feature is only available on the WLAN 6140 Handset.
Push-to-talk (PTT) mode enables two-way radio communication with another handset
user. You can configure PTT by using the following:
• Channel — selects the channel to be used.
• Enable/Disable — enable or disable Push-to-talk.
• Audio Volume — set the audio volume when using Push-to-talk.
• Tone Volume — set the volume of the tone played for Push-to-talk.
To set up a Push-to-talk channel
1. While the handset is in the standby state,
press the
Cfg soft key.
2. Use the Nav keys to scroll through the
menu and highlight Push-to-talk .
3. Press Enter to select the option. The
next menu level is displayed.