Nortel Networks ICS 4.1 User Manual
Page 64
Page 58
Compact ICS 4.1 Programming Record
P0906186 Issue 02
Restrn filters
These are sets or groups of restrictions and associated overrides that specify the external
numbers or feature codes that cannot be dialed from a telephone or line.
Show filter:_
Enter the two-digit restriction filter number.
Restrn 00
Filter 00 is pre-set with no restrictions.
Restrn 01
First programmable restriction. For each filter, enter up to 48 restrictions.
Deny
No overrides
Enter the digits you wish to be restricted when this filter is used.
Enter the dialing sequences which are allowed to override this filter, if any.
Set restrns
Select restrictions for a specific set.
Filters
Select the restriction filters for a specific set.
Normal
Night
Evening
Lunch
Sched 4
Sched 5
Sched 6
Enter the number (two-digit) of the restriction filter to apply during normal service and each of
the schedules.
Set lock
Select the level of personal programming and customizing that can be performed at a
telephone.
Allow last no
Select whether a telephone can use Last Number Redial (ÄÞ).
Allow saved no
Select whether a telephone can use Saved Number Redial (Äßà).
Allow link
Select whether a telephone can use Link (ÄàÚ) to access the features of a private
branch exchange.
Line/set rstrns
Assign restriction filters to certain lines on each set in your system.
Show line:_
Select the line on this telephone for which the restriction will apply.
Normal
Night
Evening
Lunch
Sched 4
Sched 5
Sched 6
For each line, enter the number (two-digit) of the restriction filter to apply during normal service
and each of the schedules.
Telco features
This programming section lets you program the way the Norstar system works with features and
services that are based in the public network or other outside source, namely Call Display and
an external voice message service.
CLASS assignment
In this programming section, you can assign CLASS services, such Call Display, in order to
capture information about incoming and outgoing calls.