Nortel Networks ICS 4.1 - Manual (Page 74)

Page 68
Compact ICS 4.1 Programming Record P0906186 Issue 02
•• Room/desk information Setting that allows the installer to assign sets to a room.
••• Show set:_ Indicate the set you wish to configure.
••• Room #:_ Indicate the room associated with the set.
••• Adm pwd req’d: Indicate whether the set requires the use of the Hospitality Desk Admin password to access
Hospitality Desk features.
•• Call Restrns Setting that allows the installer to assign dialing filters to room occupancy states.
••• Vacant Setting that indicates the Room is empty.
•••• Use flt: Enter the dialing filter for the room state. The filters range from 00 to 99.
••• Basic Indicates the filter to be assigned for that level of room occupancy.
••• Mid Indicates the filter to be assigned for that level of room occupancy.
••• Full Indicates the filter to be assigned for that level of room occupancy.
•• Service time Setting that allows for the installer or system coordinator to program a system-wide time when
occupied rooms change state from Service done to Needs service.
••• Hour Enter the hour.
••• Minutes Enter the minutes.
•• Alarm Setting that allows the installer to configure the Alarm operation.
••• Attn attempts: Number of times the Alarm time feature attempts to get the attention of the occupant before
cancelling.
••• Retry intrvl The interval period in minutes, between each Alarm attempt.
••• Attn duration The period programmed in seconds for which a set alerts on each alarm attempt.
••• Time format Choose if alarm times are entered using a 12 hour or 24 hour clock.
Telco features This programming section lets you assign settings for external voice messaging services.
• VMsg ctr tel#s
•• VMsg center 1
••• Tel#
•• VMsg center 2
•• VMsg center 3
•• VMsg center 4
•• VMsg center 5
Enter the telephone numbers (up to 24 digits) of the voice message centers. You can enter
numbers for up to five voice message centers.
• ONN blocking Allows outgoing name and number to be blocked at the called party end on both analog and
digital lines.
•• Analog VSC Analog Vertical service code.
••• Tone Vertical service code for analog tone dialing trunks.
••• Pulse Vertical service code for analog pulse dialing trunks.
•• BRI VSC Basic Rate Interface Vertical service code.
••• Code: