NETGEAR 7200 Series Layer 2 Managed Switch Software - Manual (Page 110)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
7-68 Switching Commands
202-10010-01
Default 3600
Format config dot1x port reauthperiod <slot.port> <1-65535>
config dot1x port reauthenabled
This command enables or disables reauthentication of the supplicant for the specified port. The
reauthenabled value must be ‘true’ or ‘false’. If the value is ‘true’ reauthentication will occur.
Otherwise, reauthentication will not be allowed.
Default false
Format config dot1x port reauthenabled <slot.port> <true/
false>
show dot1x summary
This command displays a summary of the global dot1x configuration.
Format show dot1x summary
Administrative mode Indicates if authentication control is enabled on the switch. Possible values are
Enabled and Disabled.
show dot1x port summary
This command displays a summary of the dot1x configuration for a specified port or for all ports.
Format show dot1x port summary <slot.port/all>
Port The interface whose configuration is displayed in this row.
Control Mode The configured control mode for this port. Possible values are
ForceUnauthorized, ForceAuthorized, or Auto.
Operating Control Mode The control mode under which this port is operating. Possible values are
ForceUnauthorized, ForceAuthorized, or Auto.
Reauthentication Enabled Indicates if reauthentication is enabled on this port. Possible values are True or
False.
Key Transmission Enabled Indicates if the key is transmitted to the supplicant for the specified port.
Possible values are True or False.
show dot1x port detailed
This command displays the details of the dot1x configuration for a specified port.
Format show dot1x port detailed <slot.port>
Port The interface whose configuration is displayed.