NETGEAR 7200 Series Layer 2 Managed Switch Software - Manual (Page 114)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
7-72 Switching Commands
202-10010-01
config dot1x defaultlogin
This command assigns the authentication login list to use for nonconfigured users for 802.1x port
security. This setting is overridden by the authentication login list assigned to a specific user if the
user is configured locally. If this value is not configured, users will be authenticated using local
authentication only.
Format config dot1x defaultlogin <listname>
config dot1x login
This command assigns the specified authentication login list to the specified user for port security.
The
<user> must be a configured <user> and the <listname> must be a configured login list.
Format config dot1x login <user> <listname>
config dot1x port users add
This command adds the specified user to the list of users with access to the specified port. The
<user> must be a configured <user> and the <port> must be a valid port. By default, a user is
given access to all ports.
Default Access to all ports
Format config dot1x port users add <user> <slot.port/all>
config dot1x port users remove
This command removes the specified user from the list of users with access to the specified port.
Format config dot1x port users remove <user> <slot.port/all>
config users defaultlogin
This command assigns the authentication login list to use for non-configured users when
attempting to log in to the system. This setting is overridden by the authentication login list
assigned to a specific user if the user is configured locally. If this value is not configured, users will
be authenticated using local authentication only.
Format config users defaultlogin <listname>