NETGEAR 7200 Series Layer 2 Managed Switch Software - Manual (Page 46)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
7-4 Switching Commands
202-10010-01
Slot.Port The port which this address was learned.
if Index This object indicates the ifIndex of the interface table entry associated with this
port.
Status The status of this entry. The meanings of the values are:
Static - The value of the corresponding instance was added by the system or a
user and cannot be relearned.
Learned - The value of the corresponding instance was learned, and is being
used.
Management - The value of the corresponding instance is also the value of an
existing instance of dot1d Static Address. Currently this is used when enabling
VLANs for routing.
Self - The value of the corresponding instance is the system’s own MAC
address.
GMRP Learned - The value of the corresponding instance was learned via
GMRP.
Other - The value of the corresponding instance does not fall into one of the
other categories.
show forwardingdb learned
This command displays the forwarding database entries for learned addresses. If the command is entered
with no parameter, all learned addresses are displayed. This is the same as entering the optional
all
parameter. Alternatively, the administrator can enter a VLAN and MAC Address to display the table entry
for the requested MAC address and all learned entries following the requested MAC address.
Format show forwardingdb learned[vlanplusmacaddr/all]
Mac Address A unicast MAC address for which the switch has forwarding and or filtering
information. The format is 6 or 8 two-digit hexadecimal numbers that are
separated by colons, for example, 01:23:45:67:89:AB. In an IVL system the
MAC address will be displayed as 8 bytes. In an SVL system, the MAC address
will be displayed as 6 bytes.
Slot.Port The port which this address was learned.
if Index This object indicates the ifIndex of the interface table entry associated with this
port.
Status The status of this entry. This value will always be Learned.
show stats port detailed
This command displays detailed statistics for a specific port.
Format show stats port detailed <slot.port>
Packets Received