NETGEAR 7200 Series Layer 2 Managed Switch Software - Manual (Page 65)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Switching Commands 7-23
202-10010-01
Default 5
Format config telnet timeout <0-160>
show forwardingdb agetime
This command displays the timeout for address aging. In an IVL system, the [fdbid|all] parameter
is required. In an SVL system, the [fdbid|all] parameter is not used and will be ignored if entered.
Default all
Format show forwardingdb agetime [fdbid|all]
Forwarding DB ID Fdbid (Forwarding database ID) indicates the forwarding database whose aging
timeout is to be shown. The all option is used to display the aging timeouts
associated with all forwarding databases. This field displays the forwarding
database ID in an IVL system. This field will not be displayed in an SVL
system.
Agetime displays the address aging timeout for the associated forwarding database in
IVL. In an SVL system, this will display the system's address aging timeout
value in seconds.
config forwardingdb agetime
This command configures the forwarding database address aging timeout. In an IVL system, the
[fdbid/all] parameter is required. In an SVL system, the [fdbid/all] parameter is not used and will
be ignored if entered.
Default The default value for <10-1,000,000> is 300 seconds
Format config forwardingdb agetime <10-1,000,000> [fdbid/
all]
Seconds The <seconds> parameter must be within the range of 10 to 1,000,000 seconds.
Forwarding Database ID Fdbid (Forwarding database ID) indicates which forwarding database's aging
timeout is being configured. All is used to configure all forwarding database's
agetime. In an SVL system, the [fdbid/all] parameter is not used and will be
ignored if entered.
Device Configuration Commands
This section describes device configuration commands.